Medium & High Pressure Devices
The mid-pressure polysulfone, PVC or acrylic (to 100psi) and high-pressure stainless steel (to 300psi) TACT Tools are suitable for field installations or laboratory analysis using 100mm2 biostuds. Medium pressure TACT Tools may be customized to accommodate specific inlet/outlet port configurations and biostud arrays.
Medium Pressure Devices
| MPMR-10PMMA | 10-port Acrylic (transparent and non-autoclavable) | Instructions |
| MPMR-10PVC | 10-port Polyvinylchloride (opaque and non-autoclavable) | |
| MPMR-10PSF | 10-port Polysulfone (transparent and autoclavable) | Instructions |
High Pressure Devices
| HPMR-10SS | 10-port Stainless Steel (opaque and autoclavable) | Instructions |
| HPMR-24SS | 24-port Stainless Steel (opaque and autoclavable) | Instructions |
Circular Bore TACT Tools with 1″ NPT Connections
An alternative design for the medium- and high-pressure manifolds is represented by the MPMR-CB series devices, which feature a larger-bore (1” diameter) channel in a circular cross-section. This configuration is intended for in-line monitoring of water systems, with male 1″ NPT ends so that it can be spliced into a 1″ PVC or steel delivery line with no reduction in flow or pressure drops across the manifold.
Circular Bore Devices
| MPMR-CB06PVC | 6-port Polyvinylchloride medium pressure (opaque and non-autoclavable) | Instructions |
| MPMR-CB32PVC | 32-port Polyvinylchloride medium pressure (opaque and non-autoclavable) | Instructions |
| HPMR-CB06SS | 6-port Stainless Steel high pressure (opaque and autoclavable) | Instructions |
| HPMR-CB32SS | 32-port Stainless Steel high pressure (opaque and autoclavable) | Instructions |